Allegro Network Multimeter 1000 / 1200 Features
Available in Portable and Rack Mount Versions
- For office buildings or data centers
- 3 x 1000Base-T monitor ports, 2 x 10GBase-T monitor ports, 2 x SFP+ monitor ports, 1 extension slot
- 20 GBit/s max. throughput
- 16 GB internal database memory, expandable up to 256 GB
- Up to 10 TB integrated ring buffer
- Up to 10,000 active IPs and 1.2 million retrospective connections at 16 GB
- Portable / 1 U
- 264 cm long x 43 mm high x 226 cm deep / 439 mm long x 43 mm high x 249 mm deep
- Weighs 2-4 kg
Real-time and Historic Web View
Allegro 1000 series appliances are cost-efficient entry-level versions for 1 GBit/s to 10 GBit/s analysis of up to 10,000 servers. These network tools provide a highly accurate analysis of an entire location. Depending on the existing network traffic, this is enough for a complete analysis of all data from the several previous days which can be retrieved in real-time from the in-memory database. All Allegro 1000 appliances can be expanded with SFP+ ports, packet ring buffers and additional in-memory database storage. The SFP+ ports allow an analysis of both short- and long-range fiber connections. The Allegro 1000 series can also be transparently installed inline in Spanning Tree or LACP trunks to analyze port extension errors.
The portable Allegro 1000 and the Allegro 1200 are available as 1 U rack units. Both appliances have the same processing power. The Allegro 1000 is designed as a portable system and therefore has only one expansion slot. The Allegro 1200 on the other hand offers two slots, one for extended network ports and the other for a large internal hard disk. Both appliances can also be equipped with a high-speed NVMe SSD.
The basic versions of the Allegro 1000 and 1200 have 2 x SFP+ for 1G and 10G SFP modules, 2 x 10GBase-T and 3 x 1GBaseT for analysis and 1 x 1GBase-T as a management port. In addition, there are expansion cards for up to 4 x SFP+ ports, 2 x 10GBase-T ports, 4 x 1GBase-T ports, 2 x SFP28, 2 x QSFP28 or 2 x SFP+ with GPS connections for exact time stamps in the nanosecond range. The basic version is equipped with a 16 GB in-memory database. This can be expanded to 64 GB or 128 GB respectively.
Internal hard disks or NVMe SSD can be installed as ring buffers. With the NVMe SSD, a continous write speed of up to 10 GBit/s is possible. As with the Allegro 200, external USB3 HDDs or SSDs can also be connected.
Historical data traffic stored in the ring buffer can be extracted in Pcap format and further processed with Wireshark (for example).
Before you download the datasheet for free, we would like to ask you to leave us your contact details. You will then receive an email with the download link.