Settings: Difference between revisions

Settings (view source)

Revision as of 08:06, 6 April 2020

46 bytes removed , 6 April 2020

no edit summary

Soumar

inactive

1,775

edits

@@ Line 298: / Line 298: @@
 The IP module can be configured to store less information for significant less memory usage and slightly better performance.
-* Store connection information for every IP: This option is enabled
+* Store connection information for every IP: This option is enabled by default. When enabled, the IP measurement module stores every connection for each IP.
-  by default. When enabled, the IP measurement module stores every
+This includes historical packet counter so you can see for individual connection at which time the connection transferred which amount of data.
-  connection for each IP. This includes historical packet counter so
+Connection data will be stored as long as possible regarding the total memory usage.
-  you can see for individual connection at which time the connection
+Disabling this option will increase the minimum storage time significantly.
-  transferred which amount of data. Connection data will be stored as
-  long as possible regarding the total memory usage.
-  Disabling this option will increase the minimum storage time
+* Store layer 7 protocol information for every IP: The network protocols and their historical traffic data is stored for each IP if this option is enabled.
-  significantly.
+Disabling this option will increase the minimum storage time slightly.
-* Store layer 7 protocol information for every IP: The
+* Track number of new connections for every IP: When this option is enabled, TCP connections per IP will be tracked.
-  network protocols and their historical traffic data is stored for
+Connections are divided into valid and invalid connections for server and client direction and the amount is shown.
-  each IP if this option is enabled.
+Disabling this option will increase the minimum storage time slightly.
-  Disabling this option will increase the minimum storage time
+* Store traffic history graph for IP peers: This option allows enabling or  disabling the traffic history graph that is shown per peer in the "Peers" tab for an IP.
-  slightly.
+Disabling this option will increase the minimum storage time slightly.
-* Track number of new connections for every IP: When this option is enabled,
+* Enable RTP measurement: This option allows enabling or disabling of RTP related statistics that are shown in the "RTP statistics" tab for an IP.
-  TCP connections per IP will be tracked. Connections are divided into valid
+Jitter and MOS calculation in the :Sip module` also depends on this switch.
-  and invalid connections for server and client direction and the amount is
+Disabling this option will increase the minimum storage time slightly.
-  shown.
-  Disabling this option will increase the minimum storage time
-  slightly.
-* Store traffic history graph for IP peers: This option allows enabling or
+<big>'''Interface and MAC throughput'''</big>
-  disabling the traffic history graph that is shown per peer in the "Peers"
-  tab for an IP.
-  Disabling this option will increase the minimum storage time
+The throughput measurement module can measure interface throughput with a configurable resolution.
-  slightly.
-* Enable RTP measurement: This option allows enabling or disabling of RTP
-  related statistics that are shown in the "RTP statistics" tab for an IP. Jitter
-  and MOS calculation in the :Sip module` also depends on this switch.
-  Disabling this option will increase the minimum storage time slightly.
-<big>'''Interface and MAC throughput'''</big>
-The throughput measurement module can measure interface throughput with a configurable
+The module can report its measurements via IPFIX or generate incidents as soon as a configured threshold exceeds.
-resolution. The module can report its measurements via IPFIX or generate incidents
-as soon as a configured threshold exceeds.
 It can be configured as follows:
-* '''Duration of one measurement interval in milliseconds''': The measurement interval
+* '''Duration of one measurement interval in milliseconds''': The measurement interval in milliseconds.
-  in milliseconds. For each interval all packets are aggregated until the
+For each interval all packets are aggregated until the interval duration is over and a new interval starts.
-  interval duration is over and a new interval starts.