PPPoE module: Difference between revisions
(Created page with "The PPPoE module shows all PPPoE sessions and traffic within a certain session. == Web interface == The PPPoE page shows on top a global graph for both PPPoE discovery and P...") |
m (→Web interface) |
||
| (2 intermediate revisions by 2 users not shown) | |||
| Line 6: | Line 6: | ||
The PPPoE page shows on top a global graph for both PPPoE discovery | The PPPoE page shows on top a global graph for both PPPoE discovery | ||
and PPPoE session traffic. PCAP buttons allows for capturing that particular | and PPPoE session traffic. PCAP buttons allows for capturing that particular | ||
protocol. | protocol. Discovery packets can also be extracted together with LCP packets. | ||
A table shows all PPPoE sessions with its session ID, used authentication | A table shows all PPPoE sessions with its session ID, used authentication | ||
protocol (PAP or CHAP) and | protocol (PAP or CHAP), authentication state and link configuration state. The PACP button allows for | ||
capturing that particular session. | capturing that particular session. | ||
=== Timing === | |||
For every PPPoE session the start and termination time is shown if corresponding PPPoE discovery PADS or PADT packets have been seen. The session duration is calculated based on those times. The first and last activity is updated according to session traffic. In case PADS or PADT have not yet been seen, the activity times will be taken into account for duration calculation. | |||
Latest revision as of 10:05, 29 March 2023
The PPPoE module shows all PPPoE sessions and traffic within a certain session.
Web interface
The PPPoE page shows on top a global graph for both PPPoE discovery and PPPoE session traffic. PCAP buttons allows for capturing that particular protocol. Discovery packets can also be extracted together with LCP packets.
A table shows all PPPoE sessions with its session ID, used authentication protocol (PAP or CHAP), authentication state and link configuration state. The PACP button allows for capturing that particular session.
Timing
For every PPPoE session the start and termination time is shown if corresponding PPPoE discovery PADS or PADT packets have been seen. The session duration is calculated based on those times. The first and last activity is updated according to session traffic. In case PADS or PADT have not yet been seen, the activity times will be taken into account for duration calculation.