Settings

The Settings sub-menu allows for configuring several system parameters and for updating the system. The Allegro Network Multimeter is designed to work out-of-the-box in most installation scenarios. Therefore there are no mandatory options that must be configured before using the system.

The following setting sections are available:

Global settings

The Global settings section contains parameters for adjusting the behavior of the system. The settings are split among multiple tabs, described as follows.

Generic Settings

Packet processing mode

Webshark support Limit module processing Graph detail settings

IPFIX settings Time settings Email notification Expert settings

Packet length accounting VLAN handling Tunnel view mode Database mode settings Network performance Processing performance Packet ring buffer timeouts Data retention timeout L3 tunnel mode

Module settings

Capture traffic IP statistics Interface and MAC throughput

User defined names

Wireless management interface LAN management interface Secondary management interface Host name LLDP

Administration

SSL certificate

Filter

IP filters

Remote access and export

Statistics Export

SSH Port Forwarding

Preparing the SSH server Create a user Allow SSH access via public key Option 1: No proxy Option 2: With HTTPS proxy Configuration of the multimeter

Allegro Remote Service SNMP

User Management Roles LDAP users

==Firmware update== == License upload==