Settings: Difference between revisions
No edit summary |
No edit summary |
||
| Line 2: | Line 2: | ||
The Allegro Network Multimeter is designed to work out-of-the-box in most installation scenarios. Therefore there | The Allegro Network Multimeter is designed to work out-of-the-box in most installation scenarios. Therefore there | ||
are no mandatory options that must be configured before using the system. | are no mandatory options that must be configured before using the system. | ||
The following setting sections are available: | The following setting sections are available: | ||
==''' | ==''' Global settings'''== | ||
''' | '''Generic Settings''' | ||
Packet processing mode | Packet processing mode | ||
Webshark support | |||
Limit module processing | |||
Graph detail settings | |||
''' IPFIX settings''' | |||
''' Time settings''' | |||
''' Email notification''' | |||
'''Expert settings''' | |||
Packet length accounting | |||
VLAN handling | |||
Tunnel view mode | |||
Database mode settings | |||
Network performance | |||
Processing performance | |||
Packet ring buffer timeouts | |||
Data retention timeout | |||
L3 tunnel mode | |||
==''' Module settings'''== | |||
''' Capture traffic''' | |||
''' IP statistics''' | |||
'''Interface and MAC throughput''' | |||
==''' Incident settings'''== | |||
==''' User defined names'''== | |||
''' Wireless management interface''' | |||
''' LAN management interface''' | |||
''' Secondary management interface''' | |||
''' Host name''' | |||
''' LLDP''' | |||
==''' Multi-device settings'''== | |||
==''' Administration'''== | |||
''' SSL certificate''' | |||
==''' Filter'''== | |||
''' IP filters''' | |||
==''' Remote access and export'''== | |||
''' Statistics Export''' | |||
''' SSH Port Forwarding''' | |||
Preparing the SSH server | |||
Create a user | |||
Allow SSH access via public key | |||
Option 1: No proxy | |||
Option 2: With HTTPS proxy | |||
Configuration of the multimeter | |||
'''Allegro Remote Service''' | |||
''' SNMP''' | |||
''' User Management''' | |||
''' Roles''' | |||
''' LDAP users''' | |||
=='''Firmware update'''== | |||
==''' License upload'''== | |||
Revision as of 15:00, 3 April 2020
The Settings sub-menu allows for configuring several system parameters and for updating the system. The Allegro Network Multimeter is designed to work out-of-the-box in most installation scenarios. Therefore there are no mandatory options that must be configured before using the system.
The following setting sections are available:
Global settings
Generic Settings
Packet processing mode Webshark support Limit module processing Graph detail settings
IPFIX settings Time settings Email notification Expert settings
Packet length accounting VLAN handling Tunnel view mode Database mode settings Network performance Processing performance Packet ring buffer timeouts Data retention timeout L3 tunnel mode
Module settings
Capture traffic IP statistics Interface and MAC throughput
Incident settings
User defined names
Wireless management interface LAN management interface Secondary management interface Host name LLDP
Multi-device settings
Administration
SSL certificate
Filter
IP filters
Remote access and export
Statistics Export
SSH Port Forwarding
Preparing the SSH server Create a user Allow SSH access via public key Option 1: No proxy Option 2: With HTTPS proxy Configuration of the multimeter
Allegro Remote Service SNMP
User Management Roles LDAP users