Statistics Export via InfluxDB
Access restrictions were established for this page. If you see this message, you have no access to this page.
The Influx Export allows to write statistics from the Allegro Network Multimeter to an InfluxDB.
This can be found in the menu "Settings -> Remote access & export -> Influx Export".
InfluxDB settings
- Enabled → Enables the export
- URL → URL of the InfluxDB (for example http://influx.mycompany.com:8086)
- API Token → Organization → the organization set in the InfluxDB
- Organization → the organization set in the InfluxDB
- Bucket → name of the bucket in which the statistics should be stored
- Check TLS Certificates → For HTTPS Connections. Disable if a self signed certificate is used for the InfluxDB server.
Export Settings
| Option | Description |
|---|---|
| Interval (seconds) | Specifies the interval (in seconds) in which the statistics data from the Allegro Network Multimeter are written to the InfluxDB. The value must be greater than or equal to 1. |
| Resolution (seconds) | Specifies the resolution (in seconds) of the statistics. For example, 1 = one measurement every second, 10 = one measurement every 10 seconds. The value must be greater than or equal to 1. The value may not greater than the interval. |
| System Load Statistics | |
| Global Counters | |
| Interface Statistics | |
| Virtual Link Groups Statistics | |
| IP Global Statistics | |
| IP Device Statistics | |
| IP Device Deteils Statistics | |
| IP Device Peers Statistics | |
| DNS Statistics | |
| ARP Statistics | |
| TCP Response Time Statistics | |
| Ring Buffer Usage Statistics |