Allegro Network Multimeter Manual

Parallel packet processing

Revision as of 17:31, 7 April 2020 by Klaus (talk | contribs) (→‎How can I use the Parallel Pcap processing)
Access restrictions were established for this page. If you see this message, you have no access to this page.

What is the Parallel Pcap processing

The Parallel Pcap processing mode allows to analyze historic packets in parallel to the live analytics on one Allegro Network Multimeter. The Allegro supports Pcap files and Ring buffers as input for the Parallel Pcap processing.

Where can I configure the Parallel Pcap processing

You can enable the Parallel Pcap processing at Settings → Global Settings → PCAP parallel analysis. This mode has 3 options:

  • globally enable/disable this mode
  • Reserved memory in percent of main memory ( default 10 percent )
  • Number of offline analysis slots ( default 1 )

 

We recommend to enable the Parallel Pcap processing with default values and to restart the processing. Please be aware that your current measurement will be lost when restarting the processing.

How can I use the Parallel Pcap processing

Pcap Upload

Once you have enabled this feature and restarted the Processing, you can use it by uploading a Pcap file at Generic → Pcap Analysis.

Retrieved from "https://allegro-packets.com/wiki/index.php?title=Parallel_packet_processing&oldid=1205"