Burst analysis on a Mirror or Packet Broker input: Difference between revisions

Burst analysis on a Mirror or Packet Broker input (view source)

No change in size , 14 October 2020

m

inactive

369

edits

@@ Line 15: / Line 15: @@
 == MAC Burst measurement ==
-To analyze a specific link, you can use the MAC burst analysis. This is shown in the second tab '''MACs''' in the burst analysis module. It allows to set a specific receive and send bandwidth for a certain MAC address. Up to five MAC addresses can be analyzed. If you have an uplink, simply use the router´s MAC address here and then specify the maximum receive and send rate of the router´s uplink.
+To analyse a specific link, you can use the MAC burst analysis. This is shown in the second tab '''MACs''' in the burst analysis module. It allows to set a specific receive and send bandwidth for a certain MAC address. Up to five MAC addresses can be analysed. If you have an uplink, simply use the Router´s MAC address here and then specify the maximum receive and send rate of the Router´s uplink.
 In this example, we configured maximum values of 250 MBit/s for the downlink and 40 MBit/s for the uplink for the router MAC address.