inactive
369
edits
Burst analysis on a Mirror or Packet Broker input: Difference between revisions
Burst analysis on a Mirror or Packet Broker input (view source)
Revision as of 14:36, 14 October 2020
, 14 October 2020→MAC Burst Measurement
m (→Problem) |
|||
| Line 15: | Line 15: | ||
== MAC Burst Measurement == | == MAC Burst Measurement == | ||
To analyse a specific link, you can use the MAC burst analysis. This is shown in the second tab '''MACs''' in the burst analysis module. It allows to set a specific receive and send bandwidth for a certain MAC address. Up to five MAC addresses can be analysed. If you have an uplink, simply use the Router´s MAC address here and then specify the maximum receive and send rate of the Router´s uplink. | To analyse a specific link, you can use the MAC burst analysis. This is shown in the second tab '''MACs''' in the burst analysis module. It allows you to set a specific receive and send bandwidth for a certain MAC address. Up to five MAC addresses can be analysed. If you have an uplink, simply use the Router´s MAC address here and then specify the maximum receive and send rate of the Router´s uplink. | ||
In this example, we configured maximum values of 250MBit/s for the downlink and 40MBit/s for the uplink for the Router MAC address. | In this example, we configured maximum values of 250MBit/s for the downlink and 40MBit/s for the uplink for the Router MAC address. | ||