325
edits
Capture module: Difference between revisions
m
→Configuration settings
Remco.derooy (talk | contribs) |
Remco.derooy (talk | contribs) |
||
| Line 238: | Line 238: | ||
By clicking on the gear button on the top right of the Capture web page, you can access the configuration section. | By clicking on the gear button on the top right of the Capture web page, you can access the configuration section. | ||
*The maximum number of concurrent capture sessions Per default out-of-box setting (factory default), all Allegro Network Multimeter models allow up to 4 concurrent captures. As of FW ≥ V3.4, the number of allowed concurrent captures, can be increased up to 64, depending on model and available RAM. Note, that Increasing the number of allowed parallel/concurrent captures will decrease memory capacity for the in-memory DB, therewith decreasing the maximum timeframe of statistics held and presented in the web-interface. If the memory usage is too high, the number of parallel captures might be lower/limited by the Allegro itself. | *The maximum number of concurrent capture sessions | ||
Per default out-of-box setting (factory default), all Allegro Network Multimeter models allow up to 4 concurrent captures. As of FW ≥ V3.4, the number of allowed concurrent captures, can be increased up to 64, depending on model and available RAM. Note, that Increasing the number of allowed parallel/concurrent captures will decrease memory capacity for the in-memory DB, therewith decreasing the maximum timeframe of statistics held and presented in the web-interface. If the memory usage is too high, the number of parallel captures might be lower/limited by the Allegro itself. | |||
*Split PCAP file after this size | *Split PCAP file after this size | ||
: This option can be used to limit the size of the PCAP file when storing to an attached device. Once the captured traffic would exceed this threshold, a new PCAP file with the current time stamp is created and the traffic is written to the new file. If the time stamp is still the same, an index is attached to the filename. | : This option can be used to limit the size of the PCAP file when storing to an attached device. Once the captured traffic would exceed this threshold, a new PCAP file with the current time stamp is created and the traffic is written to the new file. If the time stamp is still the same, an index is attached to the filename. | ||