Reports: Difference between revisions

Reports (view source)

Revision as of 08:17, 8 February 2024

9 bytes added , 8 February 2024

Add Filter Options

Sebastian.Kacza

104

edits

@@ Line 9: / Line 9: @@
 Reports are persistently stored on the internal drive so they are available even after switching the device off.
-==  Available report content ==
+==  Available report options ==
-Currently there are three different report components available:
+==== Filter Options ====
+* by Virtual link group: Select the  [[Virtual Link Group functionality|Virtual Link Group]]:
+* by IP
+** no : Use no IP Filter
+** address or subnet: Only create a report on an IP address or a subnet such as 10.0.0.0/24. No Network segment overview and Top protocols report is possible.
+** group:  Only create a report on one [[IP groups|IP group]]. No Network segment overview and Top protocols report is possible.
 ====  Network segment overview ====
@@ Line 92: / Line 98: @@
 ** received + sent bytes: sorts by all traffic for a port.
 *:Please note that the IPs are grouped first and the traffic sorting is applied afterwards.
-* Filter by IP or subnet: An IP address or subnet can be specified. The traffic accounting will use this filter criteria and will only take connections into account with matching IPs. A drop down box allows selecting on which IPs the filter is applied. The filter is either applied on the IP address that is shown, or the IP address of the peer or on both addresses.
 * Select port: The ports of the connection between two IPs can be configured. By default the port is used that belongs to the IP address that is shown in the table (own port). The port of the IP of the peer can be selected in the drop down box. With this setting a source address will be shown with its destination port and vice versa.
 :Consider the following connections as an example: