340
edits
Path measurement: Difference between revisions
→Settings
| Line 65: | Line 65: | ||
* '''Maximum packet length for lost packets PCAP''': If a lost packet capture is running this setting configures the packet length for these packets. Keep this number as low as possible for optimal memory consumption. Each packet will be stored in memory until it is either confirmed by the client device (considered as not lost) or the maximum packet delay is over and the packet is considered lost and written to the PCAP. | * '''Maximum packet length for lost packets PCAP''': If a lost packet capture is running this setting configures the packet length for these packets. Keep this number as low as possible for optimal memory consumption. Each packet will be stored in memory until it is either confirmed by the client device (considered as not lost) or the maximum packet delay is over and the packet is considered lost and written to the PCAP. | ||
* '''Threshold for high latency packets PCAP''': This is the threshold for a high latency PCAP. This is applied for single device measurement only. Packets with a larger time difference in their configured VLGs as this threshold can be captured. The latency value must not be larger than the maximum packet delay. | |||
The settings must be saved but to actually take effect, a restart of the packet processing is necessary. If this step is required, a notification will tell so at the bottom of the page under '''Required actions'''. | The settings must be saved but to actually take effect, a restart of the packet processing is necessary. If this step is required, a notification will tell so at the bottom of the page under '''Required actions'''. | ||