Statistics Export via InfluxDB
The Influx Export allows to write statistics from the Allegro Network Multimeter to an InfluxDB.
This can be found in the menu "Settings -> Remote access & export -> Influx Export".
InfluxDB settings
- Enabled → Enables the export
- URL → URL of the InfluxDB (for example http://influx.mycompany.com:8086)
- API Token → Organization → the organization set in the InfluxDB
- Organization → the organization set in the InfluxDB
- Bucket → name of the bucket in which the statistics should be stored
- Check TLS Certificates → For HTTPS Connections. Disable if a self signed certificate is used for the InfluxDB server.
Export Settings
| Option | Description |
|---|---|
| Interval (seconds) | Specifies the interval (in seconds) in which the statistics data from the Allegro Network Multimeter are written to the InfluxDB. The value must be greater than or equal to 1. |
| Resolution (seconds) | Specifies the resolution (in seconds) of the statistics. For example, 1 = one measurement every second, 10 = one measurement every 10 seconds. The value must be greater than or equal to 1. The value may not greater than the interval. |
| System Load Statistics | |
| Global Counters | |
| Interface Statistics | |
| Virtual Link Groups Statistics | |
| IP Global Statistics | |
| IP Device Statistics | |
| IP Device Deteils Statistics | |
| IP Device Peers Statistics | |
| DNS Statistics | |
| ARP Statistics | |
| TCP Response Time Statistics | |
| Ring Buffer Usage Statistics |