Statistics Export via InfluxDB
The Influx Export allows to write statistics from the Allegro Network Multimeter to an InfluxDB.
This can be found in the menu "Settings -> Remote access & export -> Influx Export".
InfluxDB settings
- Enabled → Enables the export
- URL → URL of the InfluxDB (for example http://influx.mycompany.com:8086)
- API Token → Organization → the organization set in the InfluxDB
- Organization → the organization set in the InfluxDB
- Bucket → name of the bucket in which the statistics should be stored
- Check TLS Certificates → For HTTPS Connections. Disable if a self signed certificate is used for the InfluxDB server.
Export Settings
| Option | InfluxDB measurement name | Description |
|---|---|---|
| Interval (seconds) | - | Specifies the interval (in seconds) in which the statistics data from the Allegro Network Multimeter are written to the InfluxDB. The value must be greater than or equal to 1. |
| Resolution (seconds) | - | Specifies the resolution (in seconds) of the statistics. For example, 1 = one measurement every second, 10 = one measurement every 10 seconds. The value must be greater than or equal to 1. The value may not greater than the interval. |
| System Load Statistics | Save the system load, memory load and packet ingress load in percentage | |
| Global Counters | global-counters | Save the global counters mac count, ip count, connection count, connection activ, connection maximum, connection capacity. |
| Interface Statistics | interface-[interface number] | Save the Bytes and Packets (rx/tx) of all network interfaces. |
| Virtual Link Groups Statistics | virtualLinkGroup-[name] | Save the Bytes and Packets (rx) of all Virtual Link Groups. |
| IP Global Statistics | ip-global | Save the Bytes and Packets for each protocol. |
| IP Device Statistics | ip-[address] | Save the Bytes and Packets (rx/tx) for a list of IP-Devices. Addresses (IPv4/IPv6) separated by comma, without spaces. |
| IP Device Deteils Statistics | ip-[address] | Save the Bytes and Packets for each protocol for a list of IP-Addresses. Addresses (IPv4/IPv6) separated by comma, without spaces. |
| IP Device Peers Statistics | ip-[address]-peers | Save the Bytes and Packets for all peers of a list of Addresses. Addresses (IPv4/IPv6) separated by comma, without spaces. |
| DNS Statistics | dns | Save the global DNS request/replies Statistic. |
| ARP Statistics | arp | Save the global ARP request/replies Statistic. |
| TCP Response Time Statistics | tcp-response-time | |
| Ring Buffer Usage Statistics | system-ring-buffer | Save the Ring Buffer Usage in bytes |
InfluxDB & Grafana setup example with docker-compose
docker-compose.yml
version: '3.6'
services:
influxdb:
image: influxdb:latest
container_name: influxdb
restart: always
environment:
- DOCKER_INFLUXDB_INIT_MODE=setup
- DOCKER_INFLUXDB_INIT_USERNAME=admin
- DOCKER_INFLUXDB_INIT_PASSWORD=a_secure_password
- DOCKER_INFLUXDB_INIT_ORG=MyCompany
- DOCKER_INFLUXDB_INIT_BUCKET=allegro-network-multimeter
ports:
- '8086:8086'
volumes:
- influxdb-data:/var/lib/influxdb2
- influxdb-conf:/etc/influxdb2
grafana:
image: grafana/grafana-oss:latest
container_name: grafana
restart: always
depends_on:
- influxdb
environment:
- GF_SECURITY_ADMIN_USER=admin
- GF_SECURITY_ADMIN_PASSWORD=a_secure_password
links:
- influxdb
ports:
- '3000:3000'
volumes:
- grafana-data:/var/lib/grafana
- grafana-provisioning:/etc/grafana/provisioning
- ./grafana.ini:/etc/grafana/grafana.ini
volumes:
influxdb-data:
influxdb-conf:
grafana-data:
grafana-provisioning: