Settings
The Settings sub-menu allows for configuring several system parameters and for updating the system. The Allegro Network Multimeter is designed to work out-of-the-box in most installation scenarios. Therefore there are no mandatory options that must be configured before using the system.
The following setting sections are available:
Global settings
The Global settings section contains parameters for adjusting the behavior of the system.
The settings are split among multiple tabs, described as follows.
Generic Settings
Packet processing mode
This section allows for configuring the main packet processing mode:
- Bridge mode: In bridge mode, all received packets will be transmitted again on the corresponding mutual port so that the device can be placed in-line between any network component. The device will be transparent and will not modify the traffic in any way. The additional latency will be typically around or less than 1 millisecond.
- Sink mode: In sink mode, packets are only received and not forwarded. This operation mode allows for installation at a mirror port of a switch or when using a network tap to access the network traffic.
The packet processing mode can be changed during run-time.
Webshark support Limit module processing Graph detail settings
IPFIX settings Time settings Email notification Expert settings
Packet length accounting VLAN handling Tunnel view mode Database mode settings Network performance Processing performance Packet ring buffer timeouts Data retention timeout L3 tunnel mode
Module settings
Capture traffic IP statistics Interface and MAC throughput
Incident settings
User defined names
Wireless management interface LAN management interface Secondary management interface Host name LLDP
Multi-device settings
Administration
SSL certificate
Filter
IP filters
Remote access and export
Statistics Export
SSH Port Forwarding
Preparing the SSH server Create a user Allow SSH access via public key Option 1: No proxy Option 2: With HTTPS proxy Configuration of the multimeter
Allegro Remote Service SNMP
User Management Roles LDAP users
==Firmware update== == License upload==