Firmware update

From Allegro Network Multimeter Manual
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

Allegro Packets releases new Firmware on a regular basis. All customers with an active support contract can install a new version for access to new features and improvements. In most cases, it is possible to downgrade to a previous version in the event a problem appears with a firmware update. If this happens, please contact us so we can fix the issue.

This sub-page allows for uploading and activating new Firmware version.

When a new Firmware Release is available from Allegro Packets, you can upload the file by clicking on the upload button and select the file from your hard disc. The device will verify the file and give positive or negative feedback. All available firmware's are listed and can be activated by clicking on the Star symbol on the right side of the page. Activating will take some time. When it is finished, an green info box will appear.

You should reload the website to allow the website changes to take effect. You can activate an older firmware if you choose so in the event there is a problem with a newer release. You may also delete an old firmware from the device by clicking on the trashcan symbol. Old or new firmware's can be uploaded again at any later time.

Web interface

Firmware update.png

New firmware versions can be uploaded to the device either manually or automatically via our online service. In any case, a firmware version is never activated automatically but must be activated manually since this step will clear all previous measurement data.

Online check and upload

If the device has Internet access, it is possible to check for new firmware versions and load them automatically to the device.

  1. Go to the menu Settings -> Firmware update
  2. Click on Check for new Firmware
  3. A dialogue will indicate if a new firmware is available, and if so, the changes will be shown.
  4. After confirmation, the firmware will be loaded onto the device but not yet activated.

Automatically check for new firmware updated

This setting allows for checking for new firmware versions once per day. If a new firmware version is available, a dialog will pop up and allow for downloading it.

Manual upload

With each release, Allegro Packets will send you an email with Release notes and a link to download the update. If you wish to be added to this mailing list, please send us an email with the Allegro Network Multimeter serial number to support@allegro-packets.com with the subject Release. You will find the serial number via the web interface under Info → System info → System ID. A link to unsubscribe from the mailing list is included in every email.

The release email will contain a download link for the firmware image and the release notes.

  1. Go to the menu Settings -> Firmware update
  2. Click on Upload new Firmware and select the firmware file (ending with .bin) from your computer.
  3. The firmware will be loaded onto the device but not yet activated.

Activate firmware versions

The firmware activation will stop any current packet processing and clear all measured data. The new firmware will be installed and started. All settings will remain active.

  1. Go to the menu Settings -> Firmware update
  2. In the section Stored Firmware a list of up to 3 firmware versions are displayed.
  3. You can delete any version manually but the oldest one will be removed automatically once a new firmware version is uploaded to the device.
  4. Click on the button Activate this Firmware to start the installation process.
  5. The firmware activation can take up to 2 minutes. A confirmation dialogue should show that the new version has been successfully installed.
  6. In rare cases, the web browser may lose connection to the web interface so no confirmation dialogue appears, or an error is shown. In this case, try reloading the web page and check the active firmware version shown at the beginning of the page.
  7. If the firmware activation fails, follow the instructions to report a bug.

Available hardware updates

In some cases an update of base hardware firmware may become necessary or is recommended. If such an update is availabe for hardware in the device, the 'Available hardware updates' section is shown with a description of the update and a 'Run hardware update' button. Clicking this button shows a dialog with important update information and confirming this dialog will run the update. In general, the device will interrupt normal operation for the duration of the update. It is important that the device is not powered off while the update is in progress.