Generic Allegro Network Multimeter installation

From Allegro Network Multimeter Manual
Revision as of 17:04, 30 April 2020 by Ralf (talk | contribs)
Jump to navigation Jump to search

All Allegro Network Multimeters share the same basic installation steps.

A quick installation guide is provided with each device as a printed document or on our web site.

The basic steps, described in detail in the installation guide, are:

  1. Connect the external power supply or cable to the internal power supply.
  2. Connect the LAN connection for management access,
  3. Or, connect the Wi-Fi device for wireless access.
  4. Setup Bridge or Sink mode depending on whether you want to deploy the device in-line or on a passive Tap or Mirror Port.
  5. Connect the measurement ports.
  6. Start the device.
  7. Access the web interface.