Generic Allegro Network Multimeter installation
Jump to navigation
Jump to search
Generic install information
All Allegro Network Multimeters share the same basic installation steps.
A quick installation guide is provided with each device as a printed document or on our web site.
The basic steps, described in detail in the installation guide, are:
- Connect the external power supply or cable to the internal power supply.
- Connect the LAN connection for management access,
- Or, connect the Wi-Fi device for wireless access.
- Setup Bridge or Sink mode depending on whether you want to deploy the device in-line or on a passive Tap or Mirror Port.
- Connect the measurement ports.
- Start the device.
- Access the web interface.
Note that an initial configuration of the Management interface settings on console is possible.
Device specific installation guides
Allegro model | Installation guide |
---|---|
Allegro 200 | Installation Guide 200 (English) |
Allegro 500 | Installation Guide Allegro 500 (English) Installation Guide Allegro 500 (Deutsch) |
Allegro 1000/1200 Allegro 3000/3200 |
Installation Guide 1000/1200/3000/3200 (English) |
Allegro 1300/3300/5300 | Installation Guide Allegro 1300/3300/5300 (English) Installation Guide Allegro 1300/3300/5300 (Deutsch) |
Allegro 1400/3400/5400 | |
Allegro 1500/3500/5500 | Installation Guide Allegro 1500/3500/5500 (Englisch) Installation Guide Allegro 1500/3500/5500 (Deutsch) |
Allegro Virtual Edition | Installation Guide Allegro Virtual Edition (English) Installation Guide Allegro Virtual Edition (Deutsch) |