WiFi module

From Allegro Network Multimeter Manual
Revision as of 14:47, 6 November 2020 by Ralf (talk | contribs) (Created page with "This module analyses IEEE 802.11 frame encapsulated in special packets (https://www.wireshark.org/docs/dfref/p/peekremote.html). === Statistics === The statistics page shows...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

This module analyses IEEE 802.11 frame encapsulated in special packets (https://www.wireshark.org/docs/dfref/p/peekremote.html).

Statistics

The statistics page shows two generic packet counts:

BSS QoS frames

The table shown in this section lists all so-called "base service sets" which are usually the access points.

The MAC address is shown as well as the number of packets and bytes transmitted as part of data QoS frames.

The signal and noise level is shown as well.

Per-BSS statistics

For each BSS MAC address, more detailed information can be shown by clicking on the MAC address in the BSS list.

The detail page shows an overview for this BSS ID and contains additional tabs for the list of subscribers of that base service set, as well as the list of frequencies, channels, and bands used by this base service set.