LLDP module

From Allegro Network Multimeter Manual
Revision as of 09:58, 23 April 2020 by Soumar (talk | contribs) (Created page with "The LLDP module extracts information from LLDP messages (Link Layer Discovery Protocol) and correlates thisinformation to the respective MAC and IP addresses. ''' Web interf...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

The LLDP module extracts information from LLDP messages (Link Layer Discovery Protocol) and correlates thisinformation to the respective MAC and IP addresses.


Web interface

LLDP module.png

There are two tabs: one tab for IPs and one tab for MACs. Each tab shows a list of the addresses for which LLDP information was seen along with some information that was provided for the address.

The columns displayed are as follows:

  • IP or MAC: Depending on the selected tab this column shows either the IP address or the MAC address for which the LDAP information in this row was transmitted. A click on the address will open the detailed statistics for that address.
  • Alternative names: Names for the address that were gathered from other data sources (DNS, DHCP, etc.) or custom defined names are displayed in this column.
  • Last updated: Shows the time when the information was last updated by decoding a LLDP packet.
  • System name: The name of the system as transmitted in the LLDP packet.
  • System description: The description string for the system as transmitted in the LLDP packet.
  • Port name: The port name as transmitted in the LLDP packet.

The search bar allows to filter for a specific IP/MAC address, names or for LLDP information in the table.