Virtual Link Group Configuration Guide: Difference between revisions

Virtual Link Group Configuration Guide (view source)

2 bytes removed , 30 April 2020

inactive

369

edits

@@ Line 13: / Line 13: @@
 == Use case: Multiple uplinks mirroring with multiple mirror ports ==
-If you would like to monitor multiple uplinks of a switch, router or any other network device, you can configure a mirror port for each uplink on your switch. The configure for each mirror port a virtual link Group with just one interface on the Allegro.
+If you would like to monitor multiple uplinks of a Switch, router or any other network device, you can configure a Mirror Port for each uplink on your Switch. The configure for each mirror port a virtual link Group with just one interface on the Allegro.
 [[File:Virtual link setup mirror.png|400px]]
-If you configure 2 mirror ports ( one for rx, one for tx ) on your switch, just include both interfaces on the Allegro for the link group.
+If you configure 2 Mirror Ports ( one for rx, one for tx ) on your Switch, include both interfaces on the Allegro for the link group.
-Once you setup is done, the [[Dashboard]] shall show you the traffic per virtual link group.
+Once the setup is complete, the [[Dashboard]] will show you the traffic per virtual link group.
 == Use case: Multiple uplinks in-line or tapped ==