Quickstart: Difference between revisions

* The green or red box left to the zoom buttons indicate whether the currently shown data is live data or the back-in-time mode is active showing data from a specific time frame (whose start and end time is shown inside the box). Click the red box again to go back to the live view.

* In the live mode, the traffic values are so called "all-time" values which means the counters represent the amount of packets/bytes seen from the start of the device. In the back-in-time mode with an interval from the past, the traffic values represent only that specific time range.

* The left side of the web page contains the menu to access different network measurement modules, on '''L2 - Ethernet layer''', on '''L3 - IP layer''', on '''L4 - Transport layer''' or on '''L7 - Application layer'''.

* The rest of the windows contains the actual network parameters depending on the sub page you are on.  All different measurement modules uses links to access data stored in different modules. For instance, the MAC overview shows IP addresses seen for a specific MAC address, clicking on it will lead to the IP specific site of the IP measurement module. Many measurement modules show lists of elements, such as IP addresses or connections. Such lists can be filtered for multiple parameters as well as sorted for different columns. There are individual manual pages for each measurement module which can be accessed by clicking on the question mark button.