Burst analysis on a Mirror or Packet Broker input: Difference between revisions

Burst analysis on a Mirror or Packet Broker input (view source)

49 bytes added , 9 June 2020

340

edits

@@ Line 17: / Line 17: @@
 == MAC Burst measurement ==
-To analyze a specific link, you can use the MAC burst analysis. This is shown in the second tab '''MACs''' in the burst analysis module. It allows to set a specific receive and send packet rate for one mac address. If you have an uplink, simply use the router´s MAC address here and then specify the maximum receive and send rate of the router´s uplink.
+To analyze a specific link, you can use the MAC burst analysis. This is shown in the second tab '''MACs''' in the burst analysis module. It allows to set a specific receive and send bandwidth for a certain MAC address. Up to five MAC addresses can be analyzed. If you have an uplink, simply use the router´s MAC address here and then specify the maximum receive and send rate of the router´s uplink.
-In this example, I have used a test link with 250MBit/s downlink and 40MBit/s uplink for the router MAC address.
+In this example, we configured maximum values of 250MBit/s downlink and 40MBit/s uplink for the router MAC address.
 [[File:Burst mac measurement.png|500px]]