60
edits
Analyze connections between remote sites: Difference between revisions
Analyze connections between remote sites (view source)
Revision as of 08:46, 21 April 2022
, 21 April 2022no edit summary
No edit summary |
No edit summary |
||
| Line 19: | Line 19: | ||
# You need two Allegro Network Multimeters (any model). | # You need two Allegro Network Multimeters (any model). | ||
# One Multimeter (the main device) will receive traffic information from the remote Multimeter via a standard SSL connection; the main device must be able to connect to the remote device. If a firewall is in place between both devices, an additional rule might be necessary to connect the remote device on port 443. | # One Allegro Network Multimeter (the main device) will receive traffic information from the remote Allegro Network Multimeter via a standard SSL connection; the main device must be able to connect to the remote device. If a firewall is in place between both devices, an additional rule might be necessary to connect the remote device on port 443. | ||
== Device installation == | == Device installation == | ||
# Install the main device in your network where it can see the traffic sent and received to the remote site. The Multimeter can be installed on a Mirror Port of a Switch which sees all the traffic, or inline between the local network and uplink to the remote site. | # Install the main device in your network where it can see the traffic sent and received to the remote site. The Allegro Network Multimeter can be installed on a Mirror Port of a Switch which sees all the traffic, or inline between the local network and uplink to the remote site. | ||
# Install the device on the remote site at a network position where it sees all traffic from and to the local network. Again, this can be a Mirror Port of a Switch on the remote site, or inline between the remote network and the link to the local network. | # Install the device on the remote site at a network position where it sees all traffic from and to the local network. Again, this can be a Mirror Port of a Switch on the remote site, or inline between the remote network and the link to the local network. | ||
| Line 34: | Line 34: | ||
# Remote device: First, the remote device must be added to your multi-device setup, which can be configured under [[Multi-device settings|<u>Multi device settings</u>]]. | # Remote device: First, the remote device must be added to your multi-device setup, which can be configured under [[Multi-device settings|<u>Multi device settings</u>]]. | ||
# Main device: | # Main device: | ||
## Access the web page of the Multimeter and go to "Generic -> Path measurement". | ## Access the web page of the Allegro Network Multimeter and go to "Generic -> Path measurement". | ||
## Switch to the configuration tab. | ## Switch to the configuration tab. | ||
## Click on the toggle button to enable the feature. | ## Click on the toggle button to enable the feature. | ||