Multi-device settings

The multi-device feature allows to access multiple Allegro Network Multimeter from a single master device. The access to the remote devices is routed through the master device so the web user does not have to have direct access to the target devices.

Features like the Path measurement also use the multi-device settings to access the remote device for the measurement.

As soon as a remote multi-device is active, the top menu shows a drop-down menu to be able to select the current view. All measurement data shown in the web interface are from the selected device.

List of remote devices

The first part of the page contains the list of all configured remote devices. It shows the host name or IP for the corresponding device and an arbitrary description for each devices which can also be changed.

Next to the description details of the SSL certificate of the remote device is shown so it is possible to verify the correct certificate.

The last column allows to activate or deactivate devices and remove them completely from the list. Only activated devices are actually contacted and made available in the top selection box.

Add a remote multimeter

Below the list of registered multimeters new devices can be added by entering the host name or IP address, optionally setting a description for the device, and the login credentials

Master device description

The master device can also have an arbitrary description to make it easier to select it from the top selection box.