115
edits
Incidents: Difference between revisions
→3. Burst incident settings
| Line 186: | Line 186: | ||
=== 3. Burst incident settings === | === 3. Burst incident settings === | ||
[[File:Incidents others.png|thumb|600x600px|Other incidents]] | [[File:Incidents others.png|thumb|600x600px|Other incidents]] | ||
Interface throughput incidents are generated by the throughput measurement module as soon as a configurablethreshold exceeds. The incident contains a graph of traffic for that interface with some data points before and after the threshold has been exceeded depending on the measurement interval. A PCAP link for capturing from the packet ring buffer is shown. For further investigation of that incident, the button Use as global time range can be used to set the global range to the start and end of the incident graph (at least 5 seconds) so that all modules of the Allegro Network Multimeter show that time span. The incident generation can be configured as follows: | |||
* '''throughput threshold exceeded''': report an incident if the throughput of any network interface exceeded. | |||
* '''Throughput threshold (Mbit/s)''': The threshold is configured in Mbit/s. | |||
* '''How long throughput must be above threshold to generate incident (in milliseconds)''': The throughput must exceed the threshold for this duration in order to generate the incident. If set to zero (default) the incident is generated immediately after the threshold has been exceeded. | |||
* '''Throughput cool-down period between two incidents in milliseconds''': Defines the time after an incident where no new incident is generated even if the threshold is exceeded. If this period is passed, throughput incidents could be generated again. | |||
=== 4. Occured incident view === | === 4. Occured incident view === | ||