Ring Buffer Configuration Guide: Difference between revisions

Ring Buffer Configuration Guide (view source)

No change in size , 7 April 2020

no edit summary

404

edits

@@ Line 21: / Line 21: @@
 == '''Single Shared Ring Buffer''' ==
-The Single Shared Ring Buffer the default setup on all Allegro Network Multimeters that are shipped with '''one''' internal or external storage. This mode is designed for '''ONE''' internal, external or ISCSI storage. ( Please see the section [[#ISCSI Ring Buffer]] for more information ). It does not allow to use multiple ring buffers with one Allegro Network Multimeter. You can check at '''Generic''' → '''Storage''' if the Allegro Network Multimeter has detected a storage. Here an example of ONE attached disk:
+The Single Shared Ring Buffer the default setup on all Allegro Network Multimeters that are shipped with '''one''' internal or external storage. This mode is designed for '''ONE''' internal, external or iSCSI storage. ( Please see the section [[#iSCSI Ring Buffer]] for more information ). It does not allow to use multiple ring buffers with one Allegro Network Multimeter. You can check at '''Generic''' → '''Storage''' if the Allegro Network Multimeter has detected a storage. Here an example of ONE attached disk:
 [[File:Storage no device active.png|border|600px]]