IPMI KVM on Allegro series 1000+: Difference between revisions

IPMI KVM on Allegro series 1000+ (view source)

2 bytes added , 27 April 2020

m

no edit summary

inactive

369

edits

@@ Line 1: / Line 1: @@
 Many Allegro Network Multimeters come with a on-board [https://en.wikipedia.org/wiki/Intelligent_Platform_Management_Interface IPMI] interface for basic hardware management.
-This interface can be used to start, reboot, or shutdown the device without accessing the web interface. You can also access a virtual monitor to see the output on the console and use a virtual keyboard to interact with the device. This can be helpful for [[Performing a factory reset or configuration reset]].
+This interface can be used to start, reboot, or shutdown the device without accessing the web interface. You can also access a virtual monitor to view the output on the console and use a virtual keyboard to interact with the device. This can be helpful for [[Performing a factory reset or configuration reset]].
-The following table shows if the device support IPMI:
+The following table shows if the device supports IPMI:
 {| class="wikitable"