340
edits
Multi-device settings: Difference between revisions
no edit summary
No edit summary |
No edit summary |
||
| Line 26: | Line 26: | ||
The last column allows you to activate or deactivate devices and remove | The last column allows you to activate or deactivate devices and remove | ||
them completely from the list. Only activated devices are actually | them completely from the list. Only activated devices are actually | ||
contacted and made available in the top selection box. | contacted and made available in the top selection box. It is also possible | ||
to update the firmware of the remote device with the version of the master device. | |||
The settings of the master device can also by synchronized to the remote device. | |||
== Add a remote Multimeter == | == Add a remote Multimeter == | ||
| Line 38: | Line 40: | ||
The master device can also have an arbitrary description to make it | The master device can also have an arbitrary description to make it | ||
easier to select it from the top selection box. | easier to select it from the top selection box. | ||
== Firmware update == | |||
It is possible to update remote devices with the same firmware of the master device. | |||
The downloaded firmware file must exist on the master device and is used for uploading | |||
to all remote devices. No internet access is necessary. | |||
The firmware update will trigger a restart of the processing of the remote Multimeter. In case | |||
it is running in bridge mode, the link will be interrupted for a short moment! | |||
Each remote device can be updated separately by clicking the "Update firmware" button in the | |||
action column. The status column will show progress information and whether the update was | |||
successful. | |||
It is also possible to update more than one device at a time. You can check the checkboxes of | |||
one or many devices and use the button "Update firmware of selected Multimeters". All checked | |||
and visible devices of the current page will be updated. | |||
The button "Update firmware of all Multimeters" will perform the update for every configured | |||
Multimeter regardless if it is selected or not. | |||
If the firmware version of the remote Multimeter is already the same version as the master | |||
device or prior to verison 3.0, the update is not performed. | |||
== Setting synchronization == | |||
It is possible to synchronize the core settings from the master device to the remote devices. | |||
Similar to the firmware update it is possible to synchronize one, many or all remote devices at a time. | |||
Al core settings except management, multi-device and user settings can be synchronized. | |||
The settings update will trigger a reboot of the remote Multimeter. In case it is running in bridge mode, | |||
the link will be interrupted for a short moment! | |||