Speedtest: Difference between revisions
Jump to navigation
Jump to search
Access restrictions were established for this page. If you see this message, you have no access to this page.
No edit summary |
No edit summary |
||
| Line 2: | Line 2: | ||
== Usage == | == Usage == | ||
When you click on the "Start" button, the speedtest is started. The results are displayed in the following table. It is not possible to run several speedtests at the same time. | |||
Up to 50 speed testresults can be saved. | |||
[[File:Speedtest.png|1000px|none]] | [[File:Speedtest.png|1000px|none]] | ||
| Line 11: | Line 11: | ||
If "Allow public access" is activated, the speed test can be used without user login. | If "Allow public access" is activated, the speed test can be used without user login. | ||
__FORCETOC__ | Public access to the speed test can be found at the address [IP/DEVICE NAME]/speedtest.__FORCETOC__ | ||
Revision as of 11:05, 27 May 2024
The speedtest can be used to measure the network speed between the managemant interface and the Borwser.
Usage
When you click on the "Start" button, the speedtest is started. The results are displayed in the following table. It is not possible to run several speedtests at the same time.
Up to 50 speed testresults can be saved.
Settings
If "Allow public access" is activated, the speed test can be used without user login.
Public access to the speed test can be found at the address [IP/DEVICE NAME]/speedtest.