Speedtest

From Allegro Network Multimeter Manual
Jump to navigation Jump to search

Firmware version >= 4.3 is required

The speedtest can be used to measure the network speed between the management interface and the browser.

Usage

When you click on the "Start" button, the speedtest is started. The results are displayed in the following table. It is not possible to run several speedtests at the same time.

Up to 50 speedtest results can be saved.

Speedtest.png

Settings

If "Allow public access" is activated, the speed test can be used without user login.

Public access to the speed test can be found at the address [IP/DEVICE NAME]/speedtest.