Allegro 200 series

From Allegro Network Multimeter Manual
Revision as of 08:25, 23 April 2020 by Ralf (talk | contribs) (Created page with "The Allegro 200 series comes with two 1 Gigabit/s measurement ports but no dedicated on-board management port. Management connection is always done via USB adapters. The devi...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

The Allegro 200 series comes with two 1 Gigabit/s measurement ports but no dedicated on-board management port.

Management connection is always done via USB adapters. The device provides two USB ports. The white port is USB2 and the blue port is USB3 to which the USB ethernet adapter, the WiFi adapter and optionally an external storage device can be connected. If all three devices need to be used in parallel, an separate USB hub is required. This hub should be self-powered as the power budget for the USB ports is limited.

Use case white USB2 port blue USB3 port
Wireless access WiFi adapter empty
Wireless access and LAN access WiFi adapter Ethernet adapter
Fast capturing to storage, LAN access without need for capturing as browser download Ethernet adapter USB3 storage device
Fast capturing to storage, fast LAN access empty self-powered USB3 hub -> Ethernet adapter + USB3 storage device
Retrieved from "https://allegro-packets.com/wiki/index.php?title=Allegro_200_series&oldid=2062"