inactive
67
edits
Management interface settings: Difference between revisions
no edit summary
mNo edit summary |
No edit summary |
||
| Line 37: | Line 37: | ||
If enabled, the Allegro Network Multimeter will transmit LLDP (Link Layer Discovery Protocol) information for the management MAC and IP addresses on the management interface. | If enabled, the Allegro Network Multimeter will transmit LLDP (Link Layer Discovery Protocol) information for the management MAC and IP addresses on the management interface. | ||
The LLDP system name will contain the hostname of the Allegro Network Multimeter and the LLDP system description will contain the platform type (e.g. Allegro-200-rev1) and the currently installed Firmware version. | The LLDP system name will contain the hostname of the Allegro Network Multimeter and the LLDP system description will contain the platform type (e.g. Allegro-200-rev1) and the currently installed Firmware version. | ||
=== Huawei E8372 LTE Wingle === | |||
Allegro Network Multimeter 500 and upwards allow for one Management Interface to be connected via LTE through a Huawei E8372 LTE Wingle. This setup allows for a remote management connection through the [https://allegro-packets.com/wiki/Using_the_Allegro_Remote_Service Allegro Remote Service] without a local internet connectivity. In order to do this, connect your USB Wingle to your Computer and follow Huawei's instructions to set up your LTE connection. Afterwards connect the Huawei Wingle to one of the USB ports on your Allegro Network Multimeter and go to '''Settings'''->'''Management Interfaces'''. Activate '''Use optional management interface''' and configure an available IP address (e.g. 192.168.8.2/24), gateway IP (e.g. 192.168.8.1) and name server (e.g. 192.168.8.1). | |||
[[File:Secondary_lan_management.png|900px]] | |||