546
edits
Management interface settings: Difference between revisions
Management interface settings (view source)
Revision as of 07:46, 16 December 2024
, 16 December 2024no edit summary
m (→iPerf3 Server Settings: Drop outdated firmware versions) |
No edit summary |
||
| Line 31: | Line 31: | ||
A secondary management interface can be restricted to a specific device by selecting the MAC address from the corresponding drop down menu. By default, any available interface is selected that is not used for data plane measurements. | A secondary management interface can be restricted to a specific device by selecting the MAC address from the corresponding drop down menu. By default, any available interface is selected that is not used for data plane measurements. | ||
=== IPMI interface === | |||
Most Allegro Network Multimeter support an IPMI interface to access a separate Base Management Controller (BMC) ([[IPMI KVM on Allegro series 1000+]]). The IPMI can be configured via a separate web interface of the BMC, but basic IP settings can be applied here too. | |||
By default, the dedicated port is configured to do DHCP to get a dynamic IP address, but it can be reconfigured to use a static IP. | |||
=== Host name === | === Host name === | ||