SNMP: Difference between revisions
Jump to navigation
Jump to search
Access restrictions were established for this page. If you see this message, you have no access to this page.
Line 28: | Line 28: | ||
* hostname (1.3.6.1.2.1.1.5.0) | * hostname (1.3.6.1.2.1.1.5.0) | ||
* uptime (1.3.6.1.2.1.25.1.1.0) | * uptime (1.3.6.1.2.1.25.1.1.0) | ||
* interfaces (1.3.6.1.2.1.2.1.0) | * interfaces (1.3.6.1.2.1.2.1.0, 1.3.6.1.2.1.3.0, 1.3.6.1.2.1.4.0) | ||
* temperature (1.3.6.1.4.1.2021.13.16.2.1.2.1 -.7) | * temperature (1.3.6.1.4.1.2021.13.16.2.1.2.1 -.7) | ||
* ICMP (1.3.6.1.2.1.5) | * ICMP (1.3.6.1.2.1.5) |
Revision as of 14:55, 21 November 2022
SNMP can be used to obtain some basic statistics of the status of the Allegro Network Multimeter.
SNMP support can be enabled in the menu "Settings -> Remote access & export -> SNMP".
Configuration settings
Configuration value | Available options | Notes |
---|---|---|
Enabled | off on for SNMPv1 support |
In firmware < 3.0 |
SNMP service | disabled SNMPv1 SNMPv2c SNMPv3 |
In firmware >= 3.0 |
Community | The community string used by SNMPv1/v2c. Default value or empty is "public". | |
User name | The SNMPv3 user name | In firmware >= 3.0 |
User password | The SNMPv3 password for authentication and encryption | In firmware >= 3.0 |
Authentication method | SHA SHA-256 SHA-512 |
In firmware >= 3.0 |
Encryption method | AES | In firmware >= 3.0 |
Supported attributes
- hostname (1.3.6.1.2.1.1.5.0)
- uptime (1.3.6.1.2.1.25.1.1.0)
- interfaces (1.3.6.1.2.1.2.1.0, 1.3.6.1.2.1.3.0, 1.3.6.1.2.1.4.0)
- temperature (1.3.6.1.4.1.2021.13.16.2.1.2.1 -.7)
- ICMP (1.3.6.1.2.1.5)
- storage (1.3.6.1.2.1.25.2.3.1.3)
Supported transport methods
The SNMP access uses UDP on port 161. If SNMPv3 is enabled, it uses the User-Based Security Model (USM) for authentication and ecryption. In this mode, only "authPriv" is supported.
SNMP version | Protocol and port | Security |
---|---|---|
v1/v2c | UDP 161 | none |
v3 | UDP 161 | USM authPriv |
Feature set | SNMP v1 | SNMP v3 |
---|---|---|
plain access | yes | no |
authentication | no | mandatory (SHA, SHA-256, SHA-512) |
encryption | no | mandatory (AES) |
USM | no | yes |
via TLS | no | no |
via DTLS | no | no |
via SSH | no | no |