Generic Allegro Network Multimeter installation: Difference between revisions

Generic Allegro Network Multimeter installation (view source)

3 bytes added , 27 April 2020

no edit summary

inactive

369

edits

@@ Line 1: / Line 1: @@
-All Allegro Network Multimeter share the same basic installation steps.
+All Allegro Network Multimeters share the same basic installation steps.
-An quick installation guide is provided with each device as a printed document or at our [https://allegro-packets.com/en/support web site].
+A quick installation guide is provided with each device as a printed document or on our [https://allegro-packets.com/en/support web site].
 The basic steps, described in detail in the installation guide, are:
 # Connect the external power supply or cable to the internal power supply.
-# Connect the LAN connection for the management access
+# Connect the LAN connection for management access,
-# Or connect the WiFi device for wireless access
+# Or, connect the Wi-Fi device for wireless access.
-# Setup bridge or sink mode depending on whether you want to deploy the device in-line or on a passive tap or mirror port.
+# Setup Bridge or Sink mode depending on whether you want to deploy the device in-line or on a passive Tap or Mirror Port.
-# Connect the measurement ports
+# Connect the measurement ports.
-# Start the device
+# Start the device.
-# Access the web interface
+# Access the web interface.