inactive
369
edits
Management interface settings: Difference between revisions
Jump to navigation
Jump to search
→Wireless management interface
| Line 7: | Line 7: | ||
The wireless management interface can operate in two modes: | The wireless management interface can operate in two modes: | ||
* Join existing network: In this mode, the Allegro Network Multimeter will connect to | * Join existing network: In this mode, the Allegro Network Multimeter will connect to an existing Wi-Fi network. To do so, enter the name (SSID) of the network and the password. The Wi-Fi Access Point should list the IP it assigns to the Allegro Network Multimeter. | ||
* Manage own network: In this mode, the device will setup | * Manage own network: In this mode, the device will setup its own Access Point so you can connect a laptop or smartphone directly to the device and access the management interface. In this mode, the web interface can be accessed by entering the URL '''https://allegro/''' into a web browser. | ||
Additionally, two other options are available in this mode: | Additionally, two other options are available in this mode: | ||
* Channel: A fixed | * Channel: A fixed Wi-Fi channel can be selected so the Access Point only uses this channel instead of automatically choosing the best available channel. | ||
* Disable default gateway: If enabled, the | * Disable default gateway: If enabled, the Access Point will not announce to be the default gateway/route for this network. If so, the device can only be accessed by using the IP address 192.168.4.1. If this option is disabled, the name server running on the device will also resolve the name '''allegro/''' to make it easier to access to the device. This option is useful if there is still another active connection which should still be used, such as a mobile connection or the internal company network. | ||
=== LAN management interface === | === LAN management interface === | ||