Global settings: Difference between revisions

Global settings (view source)

6 bytes removed , 22 May 2020

inactive

369

edits

@@ Line 8: / Line 8: @@
 This section allows for configuring the main packet processing mode:
-* Bridge mode: In bridge mode, all received packets will be transmitted again on the corresponding mutual port so that the device can be placed in-line between any network component. The device will be transparent and will not modify the traffic in any way. The additional latency will be typically around or less than 1 millisecond.
+* Bridge mode: In Bridge mode, all received packets will be retransmitted on the corresponding mutual port so that the device can be placed inline between any network component. The device will be transparent and will not modify the traffic in any way. The additional latency will be typically around or less than 1 millisecond.
-* Sink mode: In sink mode, packets are only received and not forwarded. This operation mode allows for installation at a mirror port of a switch or when using a network tap to access the network traffic.
+* Sink mode: In Sink mode, packets are only received and not forwarded. This operation mode allows for installation at a Mirror port of a Switch or when using a network Tap to access the network traffic.
-The packet processing mode can be changed during run-time.
+The packet processing mode can be changed during runtime.
 === Webshark support ===