325
edits
Remco.derooy (talk | contribs)  | 
				Remco.derooy (talk | contribs)   | 
				||
| Line 10: | Line 10: | ||
* '''Bridge mode''': In Bridge mode A.K.A. In-Line mode, all received packets will be transmitted between corresponding port pairs (e.g. 1+2, 3+4 on Allegro 500) so that the Allegro can be placed inline between any network component.  | * '''Bridge mode''': In Bridge mode A.K.A. In-Line mode, all received packets will be transmitted between corresponding port pairs (e.g. 1+2, 3+4 on Allegro 500) so that the Allegro can be placed inline between any network component.  | ||
The device will   | The device will operate transparent and will not modify network traffic in any way. The additional latency will be typically around or less than 1 millisecond.  | ||
In Bridge mode it is also possible to process network traffic from a mirror port or Tap. "Only" half of the total available ports on each respective Allegro Network Multimeter model can be used to operate in this way.  | |||
For example on a 4-port Allegro model 500, you can conveniently leave the unit in bridge mode and connect upto two mirror ports on interfaces 1 and 3 respectively. Aforementioned interfaces are physically separated and not an (in-line) interface pair.  | |||
Always avoid connecting mirror port traffic on an Allegro Network Multimeter interface pair (e.g. 1+2, 3+4 on Allegro 500), as this wil result in TX traffic in the direction of a mirror port which if higly undesireable.  | |||
[[File:Inline mode.jpg|800px|Allegro in brigde mode (in-line)]]  | [[File:Inline mode.jpg|800px|Allegro in brigde mode (in-line)]]  | ||
* '''Sink mode''': In Sink mode, the Allegro will operate   | * '''Sink mode''': In Sink mode, the Allegro will operate "receive only". Packets are not forwarded and there's no bi-directional traffic on any of the monitoring ports. This operation mode allows for installation at a Mirror port of a Switch or when using a network Tap to access the network traffic.  | ||
[[File:Sink mode1.jpg|800px|Allegro in Sink mode on Mirror port or Tap]]  | [[File:Sink mode1.jpg|800px|Allegro in Sink mode on Mirror port or Tap]]  | ||
edits