Global settings: Difference between revisions

Global settings (view source)

193 bytes added , 10 July 2023

340

edits

@@ Line 177: / Line 177: @@
 ===Tunnel view mode===
-The Allegro Network Multimeter can decapsulate VXLAN, ERSPAN type II and type III, GENEVE, CAPWAP as well as L2TPv3 data traffic. In this mode all non-encapsulated traffic will be discarded. On the Dashboard a dropped counter will display dropped non-encapsulated packets for indication if this mode is active. The Allegro Network Multimeter will show the encapsulated content in all analysis modules. When capturing, packets with complete outer Layer 2, Layer 3, GRE, ERSPAN, GENEVE, CAPWAP and L2TPv3 headers will be stored as seen on the wire.
+The Allegro Network Multimeter can decapsulate GRE, VXLAN, ERSPAN type II and type III, GENEVE, CAPWAP as well as L2TPv3 data traffic. Depending on this option either the outer tunnel or the inner content is shown in all analysis modules.
+There are three possible modes:
+- don't decapsulate traffic (default)
+- decapsulate tunnel traffic, discard non-encapsulated traffic
+- decapsulate tunnel traffic, process also non-encapsulated traffic
+In case the mode is active with discarding non-encapsulated traffic, on the Dashboard a dropped counter will display dropped non-encapsulated packets.
+When capturing, packets with complete outer Layer 2, Layer 3, GRE, ERSPAN, GENEVE, CAPWAP and L2TPv3 headers will be stored as seen on the wire.
 ===Database mode settings ===