104
edits
Management interface settings: Difference between revisions
Add firewall settings
(Add firewall settings) |
|||
| Line 36: | Line 36: | ||
By default, the dedicated port is configured to do DHCP to get a dynamic IP address, but it can be reconfigured to use a static IP. | By default, the dedicated port is configured to do DHCP to get a dynamic IP address, but it can be reconfigured to use a static IP. | ||
=== Access Restrictions === | |||
Since firmware version 4.5, there are some access restrictions for all services at all management interfaces possible. | |||
[[File:Firewall.png|left|thumb|900x900px]] | |||
* '''Enable ICMP''': Enables the ICMP service (ping), default value is On. | |||
* '''Enable HTTP''': Enables the HTTP port (80) with the redirection to the HTTPS port (443), default value is On. | |||
* '''Enable bandwidth limitation''': Limits the upload and/or download bandwidth. If set to 0, there are no limitations, default value is Off. | |||
* '''Enable subnet restriction''': If enabled, allow only access only from allowed subnets, default value is Off. | |||
* '''Allowed Services''': Show a list of all active/allowed services. | |||
=== Host name === | === Host name === | ||