Speedtest: Difference between revisions
Jump to navigation
Jump to search
Access restrictions were established for this page. If you see this message, you have no access to this page.
(Improve web speedtest description) |
No edit summary |
||
| Line 1: | Line 1: | ||
'''Firmware version >= 4.3 is required''' | '''Firmware version >= 4.3 is required''' | ||
The speedtest can be used to measure the network speed between the management interface and | The speedtest can be used to measure the network speed between the management interface of the Multimeter and your browser. | ||
This web speedtest use a HTTPS connection for the bandwidth measurement. If you need a higher accuracy, you can use the [[Management interface settings|IPerf3 Server]]. | This web speedtest use a HTTPS connection for the bandwidth measurement. If you need a higher accuracy, you can use the [[Management interface settings|IPerf3 Server]]. | ||
Revision as of 07:30, 21 March 2025
Firmware version >= 4.3 is required
The speedtest can be used to measure the network speed between the management interface of the Multimeter and your browser.
This web speedtest use a HTTPS connection for the bandwidth measurement. If you need a higher accuracy, you can use the IPerf3 Server.
Usage
When you click on the "Start" button, the speedtest is started. The results are displayed in the following table. It is not possible to run several speedtests at the same time.
Up to 50 speedtest results can be saved.
Settings
If "Allow public access" is activated, the speed test can be used without user login.
Public access to the speed test can be found at the address [IP/DEVICE NAME]/speedtest.