VMWare Workstation Player/Pro Installation Guide: Difference between revisions

VMWare Workstation Player/Pro Installation Guide (view source)

Revision as of 09:31, 23 April 2020

334 bytes added , 23 April 2020

→‎OVF deployment to VMWare Workstation

Klaus

404

edits

@@ Line 33: / Line 33: @@
 [[File:Workstation player dashboard.png|600px]]
-Create a new VM with “Create / Register VM” and select the option “Deploy a virtual machine from an OVF or OVA file”.
+Import the VM with “Open a Virtual Machine” and select the "allegro-muiltimeter.ovf" file from the extracted zip archive.
-[[File:Esxi create new vm.png|600px]]
+[[File:Workstation player import.png|600px]]
-Press “Next”, use a preferred name for the Allegro and drag/drop the 2 files into the window and press “Next”.
+Now specify the location on your disk, set a name and import the VM.
+[[File:Workstation player import 2.png|600px]]
+The Allegro Virtual Edition is bein imported. Once this is done, you can edit the settings of the VM. Please note that the first interface is used for the Management Access and requires a network with DHCP server. The second network port is used as data plane. The Virtual Edition analyzes all traffic on this network port. By default, both ports are bridged to your local network. You can change the first port to NAT to allow only access from your local PC. You can also change the settings later at any time.
+[[File:Workstation player settings.png|600px]]
+Once you have configured the network settings
-[[File:Esxi create new vm step 2.png|600px]]
-Select your data storage for the Allegro. This storage will be used as the boot partition and to store the configuration of the Allegro Virtual Edition and does not require a high-speed disk. It will not store the packet ring buffer.
 [[File:Esxi create new vm select storage.png|600px]]