inactive
369
edits
FAQ: Difference between revisions
→I do not have a WIFI client and I do not have a DHCP server. How can I access the Allegro Network Multimeter?
| Line 76: | Line 76: | ||
See [[IPMI KVM on Allegro series 1000+]] for additional information. | See [[IPMI KVM on Allegro series 1000+]] for additional information. | ||
==== I do not have a | ==== I do not have a Wi-Fi client and I do not have a DHCP server. How can I access the Allegro Network Multimeter? ==== | ||
It is possible to make the Allegro Network Multimeter set a temporary static address on the LAN | It is possible to make the Allegro Network Multimeter set a temporary static address on the LAN management interface. | ||
It will return to the configured | It will return to the configured behaviour for the LAN management interface following the next restart. | ||
To enable the temporary static IP address | To enable the temporary static IP address, a USB keyboard is needed. When the keyboard is attached to one of the USB | ||
ports of the Allegro, start the device. Wait for two minutes to make sure that the device is fully operational. | ports of the Allegro, start the device. Wait for two minutes to make sure that the device is fully operational. | ||
Then press and hold the '''shift''' key while pressing the '''s''' key. After this procedure the device will be configured to | Then press and hold the '''shift''' key while pressing the '''s''' key. After this procedure the device will be configured to | ||
use the IP address '''192.168.0.1''' on the LAN | use the IP address '''192.168.0.1''' on the LAN management interface. It is now possible to e.g. connect another | ||
computer to the LAN | computer to the LAN management interface with an IP address statically configured to e.g. '''192.168.0.100''' and from | ||
that computer the user interface of the Allegro is accessible at https://192.168.0.1. | that computer the user interface of the Allegro is accessible at https://192.168.0.1. | ||
If for some reason the IP address '''192.168.0.1''' is already used in the | If for some reason the IP address '''192.168.0.1''' is already used in the network, the Allegro will try to | ||
set another IP address in the range of '''192.168.0.2''' - '''192.168.0.10'''. | set another IP address in the range of '''192.168.0.2''' - '''192.168.0.10'''. | ||
Once access to the user interface is established, a | Once access to the user interface is established, a static IP address can be configured under '''Settings''' -> | ||
'''Management | '''Management interface settings'''. | ||
== Data protection == | == Data protection == | ||