FAQ: Difference between revisions

FAQ (view source)

Revision as of 12:56, 14 May 2020

2 bytes added , 14 May 2020

→‎WIFI

David.Griffiths

inactive

369

edits

@@ Line 41: / Line 41: @@
 DHCP lease and should be traceable in the DHCP server info.
-===== WIFI =====
+===== WI-FI =====
-Every Allegro Network Multimeter comes with an USB to WIFI adapter. In the factory default configuration the adapter will
+Every Allegro Network Multimeter comes with an USB to Wi-Fi adapter. In the factory default configuration the adapter will
-create a WIFI access point when connected to the device. This access point shows up as '''allegro-mm-xxxx''' where the
+create a wi-Fi Access Point when connected to the appliance. This Access Point shows up as '''allegro-mm-xxxx''' where the
-'''xxxx''' part is made up of a hexadecimal number which is unique to the device. In factory default settings the password
+'''xxxx''' part consists of a hexadecimal number which is unique to the device. In factory default settings the password
-for the WIFI network is '''Allegro-MM''' (without the quotes). As soon as there is a connection to the WIFI, the user
+for the Wi-Fi network is '''Allegro-MM''' (without the quotes). As soon as there is a connection to Wi-Fi, the user
 interface of the device can be accessed by either browsing to https://allegro or https://192.168.4.1.
 When access to the user interface is established, the IP address of the LAN Management interface can be found under
-'''Settings''' -> '''Management Interface settings''' in the '''Active interfaces''' section.
+'''Settings''' -> '''Management interface settings''' in the '''Active interfaces''' section.
 ===== Display =====