325
edits
Global settings: Difference between revisions
→Packet processing mode
Remco.derooy (talk | contribs) |
Remco.derooy (talk | contribs) |
||
| Line 12: | Line 12: | ||
The device will operate transparent and will not modify network traffic in any way. The additional latency will be typically around or less than 1 millisecond. | The device will operate transparent and will not modify network traffic in any way. The additional latency will be typically around or less than 1 millisecond. | ||
In Bridge mode it is also possible to process network traffic from a mirror port or Tap. " | In Bridge mode it is also possible to process network traffic from a mirror port or Tap. However, "only" half of the total available ports on each respective Allegro Network Multimeter model can be used to operate in this way. | ||
For example on a 4-port Allegro model 500, you can conveniently leave the unit in bridge mode and connect upto two mirror ports on interfaces 1 and 3 respectively. Aforementioned interfaces are physically separated and not an (in-line) interface pair. | For example on a 4-port Allegro model 500, you can conveniently leave the unit in bridge mode and connect upto two mirror ports on interfaces 1 and 3 respectively. Aforementioned interfaces are physically separated and not an (in-line) interface pair. | ||