Settings: Difference between revisions

From Allegro Network Multimeter Manual
Jump to navigation Jump to search
Access restrictions were established for this page. If you see this message, you have no access to this page.
No edit summary
No edit summary
 
(93 intermediate revisions by 5 users not shown)
Line 1: Line 1:
The Settings sub-menu allows for configuring several system parameters and for updating the system.
The Settings sub-menu allows for configuring several system parameters and for updating the system. The Allegro Network Multimeter is designed to work out-of-the-box in most installation scenarios. Therefore there are no mandatory options that must be configured before using the system.
The Allegro Network Multimeter is designed to work out-of-the-box in most installation scenarios. Therefore there
are no mandatory options that must be configured before using the system.


The following setting sections are available:
* [[Global settings]]
 
* [[Module settings]]
==''' Global settings'''==
* [[User defined names]]
 
* [[Management interface settings]]
 
* [[Multi-device settings]]
<big>'''Generic Settings'''</big>
* [[Administration]]
 
* [[Time settings]]
'''Packet processing mode'''
* [[Filter|Ingress Filter]]
 
* [[Module-specific Filter]]
Webshark support
* [[Remote access and export]]
Limit module processing
* [[User Management]]
Graph detail settings
* [[Firmware update]]
 
* [[License upload]]
''' IPFIX settings'''
''' Time settings'''
''' Email notification'''
'''Expert settings'''
 
Packet length accounting
VLAN handling
Tunnel view mode
Database mode settings
Network performance
Processing performance
Packet ring buffer timeouts
Data retention timeout
L3 tunnel mode
 
 
==''' Module settings'''==
''' Capture traffic'''
''' IP statistics'''
'''Interface and MAC throughput'''
 
==''' Incident settings'''==
==''' User defined names'''==
''' Wireless management interface'''
''' LAN management interface'''
''' Secondary management interface'''
''' Host name'''
''' LLDP'''
 
 
 
 
==''' Multi-device settings'''==
 
==''' Administration'''==
 
''' SSL certificate'''
 
==''' Filter'''==
''' IP filters'''
==''' Remote access and export'''==
 
''' Statistics Export'''
 
''' SSH Port Forwarding'''
 
Preparing the SSH server
Create a user
Allow SSH access via public key
Option 1: No proxy
Option 2: With HTTPS proxy
Configuration of the multimeter
 
'''Allegro Remote Service'''
''' SNMP'''
 
''' User Management'''
''' Roles'''
''' LDAP users'''
 
=='''Firmware update'''==
==''' License upload'''==

Latest revision as of 09:17, 28 July 2025

The Settings sub-menu allows for configuring several system parameters and for updating the system. The Allegro Network Multimeter is designed to work out-of-the-box in most installation scenarios. Therefore there are no mandatory options that must be configured before using the system.

Retrieved from "https://allegro-packets.com/wiki/index.php?title=Settings&oldid=5182"