Public limited statistics
The public statistics access allows to see some selected statistics without the need to login.
For data privacy reasons, this feature must be enable first in the Remote access and export settings, and all data visible does not contain any user-related information. The available informations are described below.
The start page “/public” contains a simple list of available statistics, described in detail below.
All URLs can be extended by the following two options to adjust the statistics:
- timespan: Set the amount of time displayed in graphs. It defaults to
1 minute.
- The value is either seconds, minutes or hours, depending on the suffix.
- Examples:
timespan=120: This selects 120 seconds or 2 minutes for the timespan.timespan=60m: This selects 60 minutes or 1 hour.timespan=24h: This selects 24 hours or 1 day.
- update: Set the number of seconds between data updates. It defaults
to one update every second.
- Examples:
update=60: Updates the data once per minute.
- Examples:
List of available URLs:
| URL | Content |
|---|---|
| /public | Basic entry page |
| /public/interfaces | Interface statistics |
| /public/voip | Voice over IP statistics |
| /public/topiptraffic | Top 10 amount of IP traffic |
Interface statistics
Section titled “Interface statistics”The URL “/public/interfaces” shows the current throughput of each active interface.
For details, log in and go to Interface statistics.
VoIP statistics
Section titled “VoIP statistics”The URL “/public/voip” shows the current throughput for SIP and RTP protocol, and the error codes for SIP requests.
To see more details, log in and go to SIP module.
Top IP traffic
Section titled “Top IP traffic”The URL “/public/topiptraffic” shows two pie charts with the top amount of traffic in the last timespan. For data privacy reasons, only the amount is visible, not the actual IP addresses. To get detailed information, log in and go to IP module.